Ways to fix a hard drive that won’t power up.

Hard drive won’t power up: Hard drive not spinning, overheating, hard drive light blinking, major system failure, and data loss is symptoms of an external HDD not working properly. You should back up your hard drive as quickly as possible to avoid potential data loss. To resolve the “hard drive won’t power up we’ve summarized three possible solutions below.

Causes of the hard drive won’t power up:

  • Poor areas
  • Errors in the file system
  • Infected with a virus and malicious software (Virus or Malware)
  • A problem with the driver for the device
  • Overheating
  • SMART errors
  • Inaccuracy in mechanical or physical processes
  • My external hard drive has a problem, and it won’t recognize it.
  • You can cure your hard drive’s problem by following these instructions.

Ways to fix a hard drive that won’t power up:

Check your hard drive for any signs of physical damage before using it. Look for screeching or clicking noises when connecting the drive to your computer. Following are ways to fix hard drive won’t power up.

Find and fix any damage to the cable’s or wire’s connection.

A closer inspection of the linked drive will reveal if it’s running and rotating at full speed. It shouldn’t randomly shut off and start up again.

Related Device Drivers need an update:

External hard drives fail to power up due to obsolete or corrupted device drivers. Here are the actions you can take to update the device drivers:

Step 1: To open the Device Manager, type devmgmt. MSC in the Run dialogue box and press Enter or Win + R.

Step 2: To update your USB driver, right-click on it and pick “Update driver” from the menu

Step 3: Select “Search automatically for drivers” and follow the on-screen steps to complete the upgrade in a pop-up window.

Step 4: The USB root Hub driver must update as well—Right-click on the USB root Hub driver and select Update driver from the option that appears.

Step 5: You can now either automatically or manually update the driver, just like in

Step 6: You can then restart the computer and see whether the “external hard disc won’t power on” issue has been resolved.

In the BIOS, turn on the hard drive:

In some circumstances, the BIOS may not recognize the hard disc. It could cause the external hard disc not to turn on issue. Don’t worry; I’m here to help. To activate the hard disc in the BIOS, follow the instructions below:

Step 1: Make sure your hard drive is linked to your computer at all times.

Step 2: Restarting your computer and using the correct BIOS hotkey will allow you to access the BIOS. F2 and Delete are the most frequently used keys.

Step 3: Using the arrow keys on your keyboard travel to the Setup tab in the BIOS setup screen. The next step is to see if the hard disc is turned on. Go to System Setup and toggle it on with the F10 key if it isn’t.

Step 4: If the “external hard drive won’t power up” problem persists, perform a fresh boot of your computer.

CHKDSK can run:

Incorrect use of the disc, virus/malware infection, and the accumulation of bad sectors on the hard drive due to logical or physical damage are all causes of file system failures. Chkdsk is a Windows application that runs in a command-line mode that scans the hard drive for faults and bad sectors to recover recoverable data.

Run the CHKDSK scan on the hard drive:

Run the CHKDSK scan on your hard drive by following these steps:

Step 1: After connecting the drive to another Windows PC, press “Windows + Q” and type “System Restore.”

Step 2: To operate Command Prompt as a director, right-click on that and choose the ‘Run as Superintendent

Step 3: Enter the key to begin the process of chkdsk.

Step 4: The CHKDSK parameters are /r and /f for your external hard disc.

Step 5: Starting the CHKDSK scan, check, and repair process is now complete. Restart the computer and reattach the external hard disc after completing the process.

Step 6: Check to see if it’s accessible.

Drivers need to be reinstalled:

Device Manager can use to update or reinstall device drivers. Step-by-step instructions are as follows:

Step 1: Windows+S and type “Device Manager” will bring up the device management window.

Step 2: Your external hard disc can access by expanding the ‘Disk Drives section by right-clicking on it.

Step 3: It’s time to get rid of this app. To complete the uninstallation, click the ‘OK’ button one final time to confirm.

Step 4: After that, reboot the computer. Once the drive is disconnected and reconnected, the device driver installation process begins.

Step 5: Finally, launch File Explorer and inspect the drive’s contents

Format the disc:

To completely format the drive, use either the DISKMAN or DISKPART utilities. The HDD LLF tool can perform a low-level format on the problematic hard drive.

1: Low-level formatting can take a while, but it will correct the vast majority of disc issues and rid the drive of any malicious software or virus-infected data.

2: Contact a data recovery specialist immediately if the drive is still unrepeatable and data recovery software fails.

3: Hardware or mechanical failures may occur beyond the scope of a normal user and necessitate the assistance of a professional.

Conclusion:

Installing a reliable antivirus or anti-malware program is the best way to keep your computer safe. Monitor the health of your system drive or an external hard disc on the fly with scheduled CHKDSK checks and SMART drive monitoring software. This method will help you avoid hard drives that won’t power up, such as a hard drive that won’t react.

Read also: Jeff dean net worth in 2021.

Leave a Comment